Descripción
Documentación
100A AC Current Clamp Adapter with BNC Plug
Professional measuring transducer that allows accurate measurements of low currents up to 100 A AC in conjunction with a measuring device with BNC connection. The extended shape of the measuring tongs and large cable length allow measurements even in narrow spaces. This power tong adapter is ideally suited as an accessory for power meters, power analyzers and oscilloscopes.
- Also suitable as an accessory for the PeakTech 4145 power analyzer
- For cunductor diameters of max. 13mm
- Cable length: approx. 280cm
- Power conversion: 1mV / A
- Accuracy class: IEC 60044-1 @ 0.2%
| ACA | 0 … 100 A AC |
| ACA-Frequency | 50 … 400 Hz |
| Accuracy | +/- 0.2% |
| Nominal Voltage | max. 600V (isolated) |
| Burden Resistance | < 5Ω |
| Linearity | +/-1% @ 5% – 130% (rated current) |
| Phase Angle | < 60 min. @ 100% (rated input) |
| Dielectric Withstand | 2500V for 1 min. |
| Dielectric Resitance | 1000 MΩ @ 500 V DC |
| Dimensions (WxHxD) | 45 x 175 x 27 mm |
| Weight | ca. 400 g |
| EAN-13 | 4250569404078 |
